3/20/2023 0 Comments Intel desktop board d975xbx2![]() ![]() But even that could be resolved by manually updating the Management Engine (ME) firmware. They soon found out that the Haswell Refresh CPUs mostly work, with just one minor but highly annoying issue: Instead of rebooting, the machine hangs. Of course the owners of these boards did not leave it at that. That was no doubt particularly galling to the owners of the DZ87KLT boards, which sold for around $300 when new and are worth $150 or more even today (2019). To show just much Intel values its customers, they were informed that BIOS updates were not forthcoming and the newer, faster processors were not supported on Intel boards. For most owners of existing LGA1150 boards, supporting the new processors was just a matter of updating the BIOS. In 2014, Intel released the updated and faster Haswell Refresh CPUs, as well as the Devil’s Canyon i7-4790K, Intel’s first 4.0 GHz processor (ten years after the Pentium 4 very nearly got there first). They supported the then-new LGA1150 socket for Haswell CPUs. The DZ87KLT (Kinsley Thunderbolt) and DQ87PG (Spring Cave) were released in mid-2013 and were sold for about three years. ![]() Since I have now acquired two of those boards, DZ87KLT-75K and DQ87PG, I had an opportunity to familiarize myself with the situation. 8-series Lynx Point chipsets) of those boards. What has not been discussed is how Intel treated the buyers of the last generation (i.e. If it's not broken, don't fix it rolleyes.As previously discussed on this blog, Intel decided to quit the desktop board business in 2013. Needless to say i was happy so reset what i had done wrong put the jumpers back to normal position and its works, I looked very closely at my board to check for damage of any kind and saw another jumper configuration for the bios refering to bios config in the 2-3 position rather than in 1-2 position normal,Īnd hey presto it let me in to the bios wooooooohhhhhooooohhhoooooowwwwwwwhhhhhooooooo In the manual it refers to how to have jumpers for bios recovery etc. The problem was for some reason after the changes i made to the bios nothing worked apart from the dvd drive going nuts, baffled after clearing the cmos and trying to reinstall the bios still no joy then today i tried everything i possibilly could changed everything on the board still nothing It only took me 7 days to work out the problem haha, after taking to 3 computer shops whom had no idea, and after talking to a so called expert at intel who again couldn't help, Is this a bios problem which i think it is? and does any one know how to fix it?Ĭan i have damaged my cpu or board by doing what ive done?Īny help i would greatly appresh no one seems to know any thing about this The board seems operational as if i do take the memory out the board beeps at me, also i know the bios has been reset as i had turned off my on board lan connection as im wireless, since i took the battery out etc the lan is now operational as it flashs when is turned on strange. I have even changed my memory to see if not is a prob, I have even checked the leads on every thing, I have also removed the graphics card and see if it booted but no, I have tried with floppy and took the dvd off line but to no avail, I tried to reset the board and left the battery out for quite a while, i also have tried to recover the bios, with a cd with the instructions on the Intel site I rebooted and nothing happened, all that does happen is the dvd drive tries to read whats in the drive constantly, it doesn't beep any more the floppy drive isn't working ether, Hi i have this board and an itel quad chip, i have just installed a new graphics card, and all was fine then i decided it would be a great idea to play with the bus frequencys in my bios (big mistake), ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |